Casey's jeep projects
Forum rules
Banter is welcome here, and encouraged, however, we also ask that you keep things clean. Vulgarity and inappropriate photos or video will not be tolerated on this forum.
Banter is welcome here, and encouraged, however, we also ask that you keep things clean. Vulgarity and inappropriate photos or video will not be tolerated on this forum.
Casey's jeep projects
by Casey » Sun Oct 06, 2013 8:57 pm
Last edited by Casey on Sat Oct 19, 2013 10:00 pm, edited 2 times in total.
2006 Rubicon, stock engine #2, stock transmission, stock T-case, stock axles, stock gears, stock diffs, springier springs, couple of random holes drilled, bits of scrap metal welded on with some junkyard parts thrown in for good measure.
-
Casey - Posts: 5149
- Joined: Wed Aug 21, 2013 9:30 pm
Re: Casey's jeep projects
by Casey » Sun Oct 06, 2013 9:46 pm
2006 Rubicon, stock engine #2, stock transmission, stock T-case, stock axles, stock gears, stock diffs, springier springs, couple of random holes drilled, bits of scrap metal welded on with some junkyard parts thrown in for good measure.
-
Casey - Posts: 5149
- Joined: Wed Aug 21, 2013 9:30 pm
Casey's jeep projects
by Casey » Sun Oct 06, 2013 10:10 pm
Last edited by Casey on Thu Oct 24, 2013 8:38 am, edited 2 times in total.
2006 Rubicon, stock engine #2, stock transmission, stock T-case, stock axles, stock gears, stock diffs, springier springs, couple of random holes drilled, bits of scrap metal welded on with some junkyard parts thrown in for good measure.
-
Casey - Posts: 5149
- Joined: Wed Aug 21, 2013 9:30 pm
Re: Casey's jeep projects
by JPetru82 » Sun Oct 06, 2013 10:33 pm
-
JPetru82 - Posts: 1385
- Joined: Mon Aug 19, 2013 12:45 am
- Location: Pacifica, Ca.
Re: Casey's jeep projects
by Casey » Mon Oct 07, 2013 12:57 pm
2006 Rubicon, stock engine #2, stock transmission, stock T-case, stock axles, stock gears, stock diffs, springier springs, couple of random holes drilled, bits of scrap metal welded on with some junkyard parts thrown in for good measure.
-
Casey - Posts: 5149
- Joined: Wed Aug 21, 2013 9:30 pm
Re: Casey's jeep projects
by Casey » Mon Oct 07, 2013 1:07 pm
2006 Rubicon, stock engine #2, stock transmission, stock T-case, stock axles, stock gears, stock diffs, springier springs, couple of random holes drilled, bits of scrap metal welded on with some junkyard parts thrown in for good measure.
-
Casey - Posts: 5149
- Joined: Wed Aug 21, 2013 9:30 pm
Re: Casey's jeep projects
by Casey » Mon Oct 07, 2013 1:22 pm
2006 Rubicon, stock engine #2, stock transmission, stock T-case, stock axles, stock gears, stock diffs, springier springs, couple of random holes drilled, bits of scrap metal welded on with some junkyard parts thrown in for good measure.
-
Casey - Posts: 5149
- Joined: Wed Aug 21, 2013 9:30 pm
Re: Casey's jeep projects
by bobthetj03 » Mon Oct 07, 2013 1:28 pm
Nicely done Casey! You gots fab skilz!
I like banter!
-
bobthetj03 - Posts: 14635
- Joined: Fri Aug 16, 2013 8:53 am
- Location: Lake County, NorCal
Re: Casey's jeep projects
by bobthetj03 » Mon Oct 07, 2013 1:34 pm
I mounted my CB in the same spot! It's out of the way and doesn't clutter the dash. I attached some velcro to the mic and the front of my center console lid. It holds the mic for easy access when wheeling.
I like banter!
-
bobthetj03 - Posts: 14635
- Joined: Fri Aug 16, 2013 8:53 am
- Location: Lake County, NorCal
Casey's jeep projects
by Casey » Mon Oct 07, 2013 4:02 pm
Last edited by Casey on Thu Oct 24, 2013 8:42 am, edited 2 times in total.
2006 Rubicon, stock engine #2, stock transmission, stock T-case, stock axles, stock gears, stock diffs, springier springs, couple of random holes drilled, bits of scrap metal welded on with some junkyard parts thrown in for good measure.
-
Casey - Posts: 5149
- Joined: Wed Aug 21, 2013 9:30 pm
Who is online
Users browsing this forum: No registered users and 1 guest